Laser moving material

[pip]

Looks like @wesleyjames already linked to No Math Edition, (which itself includes the link to the original).

But for completeness here is the original:

Tutorial: How to cut without the Crumb Tray (Honeycomb)

Tutorial: How to cut objects too thick to have the honeycomb in place The GlowForge has a maximum material thickness it can cut through, but there is a maximum thickness you can even put on the honeycomb (crumb tray) even if you are surface engraving as the laser has a limited focus range of 0.01" - 0.4" *** above the surface of the honeycomb at the time of this tutorial. But let’s say you wanted to engrave something thicker that fits quite nicely inside the GlowForge but not with the crumb tray…

Please let us know if you have any other questions @coalakida!