Tissue box

[hansepe]

From the photos it looks like she used the medium proofgrade (1/8 inch / 3.3 mm) wood.

Here is the design if you didn’t find it:

Sharing tissue box design

Hey everyone! So, initially I didn’t share this design because I did MANY iterations of it that did not work (evidenced by the oops version included in this post: Tissue box) However, with all the cabin fever going on, I thought I would clean up my file and share it in case anyone else would like to make one. It does take a bit of material, so I would strongly advise prototyping on something cheap first, like cardboard (maybe leave off the cutouts if cutting from cardboard though, don’t want to…

OOPS: the design below was for cardboard.

Here is a design you can just go grab and modify as you please.

Kleenex brand tissue box: we've got you covered!

Starting this topic with the goal to investigate Inkscape’s tabbed box maker extension in Laser Tools. To provide some defaults for Proofgrade in using the extension regarding kerf and material thickness. [WIN_20171022_14_34_56_Pro] This is a handy design to have at the ready. I’m still tweaking for Proofgrade plywood and will post in a bit, but at the moment it works fine for .15" standard corrugated cardboard. I use blue masking tape to cover the cardboard. Creates a nice and light box cover…