Too quickly overheating

[Jules]

Just FYI, the Pro model is the only one that has an extended operating temperature range. The Plus is as powerful as the Pro but does not have the active cooling. So you still need to keep an eye on the temperature range for the Plus.

There are some suggestions for keeping the machines cooler.

Recent changes let you try running the fan without printing to cool things off:

Orange Light...Stumped, Maybe You Can Help?

I’m very sorry for the frustrations. The most important thing, right now, is to get you back to printing so you can catch up on orders! I’ve looked at the logs from your Glowforge and I have a workaround that will get you back to printing. I know that you’ve already received these instructions but if you encounter this error at the start of a print, doing this should allow you to get back to printing: Go to https://app.glowforge.com/maintenance/fan and click through the prompts until you get …

And some other good general suggestions:

Stuck in 'Too hot to print'

Your Glowforge features a closed-loop liquid cooling system that uses the air from the room to remove heat. It is designed to be used when the temperature next to your Glowforge is between 60 degrees Fahrenheit (16 Celsius) and 75 degrees Fahrenheit (24 Celsius). To check, put a room thermometer next to the right hand side of the Glowforge; it draws in air from underneath, on the right. You can try any of these things to improve warm-weather performance: Try printing with no material on the …