Engraving ripples

[nunzioc]

Oh, I think a lot has to do with the material, as well as the LPI.

The picture frame that I made from the GF free catalogue onto PG Plywood was reallllly smooth:

Made a few more little things

Used the GF’s design of the picture frame with living hinge to make this customized one (ummm, I had to blur out the logo of the theme party…sshhh) [image] I tink I forgot to remove some of the backing, lol. Anyway, it was fun & easy to make, but the back piece’s engraving (the big dark patch on the pic) took a while, since it basically has to cut a pretty large area with just a pin needle width laser, so it takes time to cover the whole area. If you are making a lot of these, you might be…

/uploads/db6859/optimized/3X/a/0/a065695bcf20c529431d9de594dea45d3b932901_1_374x500.jpg

Also this engraving on PG acrylic; really smooth

Oh snap...found a second - sometimes even better - use for an edge lit engraving! - Small info update on 5-1-17

OK, phase 2: Here’s the original whole body: [image] And here’s the edge lit sign from the svg; kind of disappointing, as you all could tell: [image]

/uploads/db6859/optimized/3X/7/3/73dc230d459835a59614722a2d4e8a867732ab29_1_375x500.jpg