Is there potential for the glow to be able to cut and engrave glass/woods etc

[cynd11]

Hey Lazersmart, welcome to the fun forum! I believe there is already a small amount of Glowforge-produced items on glass, ceramic, and various woods.

For instance:

Passes at Glass

A couple of firsts today… First attempt to engrave glass and first job without the crumb tray. The test article is a $2 glass bottle from Hobby Lobby. After measuring it, I propped it up on a piece of cardboard to get into focus range, and took a complete swag at the settings… [image] [image] One side I coated with a bit of dish soap, the other I left unprotected. Can’t really tell the difference. These were svg vector engraves. Next attempt will be raster engraves with 4 “colors.”

And

Pre-Release | Ichigo & Co

Supplies: Glass from a dollar store picture frame & Proofgrade 1/8" Cherry Ply - Op Time: 27mins Glass. [image] [image] [image] Cherry. [image] [image]

And

How can I be so thick? (Pro-Tube?)

Working on other stuff so this is not yet worthy of a new topic… Quick test of an engrave on standard Lowes ceramic tile. [image]