Measuring tool

[devinedesignsforyou]

Hi- someone posted a link to a measuring tool for when you remove the crumb tray and I can’t find it. Any help is appreciated.
Thank you

[beerfaced]

I searched and found this from #Dwardio:

[eflyguy]

Presenting the Focus Height Ruler (colonial edition)

(10/23/'20 Edit - I added a double-sided version here.) I present for your consideration - the Focus Height Ruler (cubic Smoots per Wiffle version, I might do a metric one later…) [image] FILE IS HERE → focus height ruler.svg.zip (6.9 KB) (Three steps - Engrave the numbers, Score the lines, & Cut) As focus height should be entered above where the crumb tray bed should be, this can be handy for determining that measurement when the bed is not there - or just to check your material thickness…

[devinedesignsforyou]

can i just copy the image or is there a file?

[dklgood]

Welcome to the forum
Right click the line drawing image above and save as an svg to your computer.

[bwente]

Unfortunately it is a png.

[bwente]

Here is the original link.

No-Math Focus Ruler

Leveraging the recently-released Set Focus tool, I’ve designed a tool to help place materials when the crumb tray has been removed, no maths required. If your material is between the lines while resting on the bottom of your GF – not the crumb tray, you should be able to use Set Focus in the UI. If the top of your material is below the bottom line, use your favorite method (sheets of PG, tiles, 3-D printed stands, matching sets of trained hedgies, etc.) to elevate it and recheck. Repeat until …