Stand for small round clay paw print

[deirdrebeth]

It would depend on how thick the disk is, but maybe one of these?

A simple stand/easel to display a flat 2.5" to 5" piece

The design assumes 1/16" material, but you can adjust the slot width to equal the material thickness, and the tab depth (between body and hook). Kerf adjustment probably not required. [IMG_6899] [simple-stand]

Picture Stand

After making a photo engraving I decided to make a stand to go with it, because I thought it looked better propped on a table instead of stuck on a wall with Command velcro strips. The stand itself is pretty basic, so the file can easily be edited to fit whatever size frame you want to prop up. It was designed with 1/8" proofgrade plywood in mind, and the joints have been kerf adjusted! Also…if anyone has a better way to upload SVGs, let me know! This is actually my first time trying. Including…

More Art / Book Stand Mods

These are modifications of @Janerlea’s Art / Book Stand (Free Art / Book Stand), posted with her permission. I wanted to use the Springtime in Kyoto and Waves of Good Fortune patterns from the GF store to display earrings, and needed a way to stand them more upright rather than tilted back, hence this mod. Then I shrunk it to make one to display my etched tiles. The larger one is sized for 0.19" material (mine are cut from Home Depot chalkboard), and the smaller one for 0.13"ish s…