I’m so sorry you hit a snag.
The issues you’re seeing might be caused by a poor connection with the cables on your lid. Please follow the steps below to check the lid connections:
-
Turn off your unit.
-
Open the lid.
-
Using both hands, gently roll the laser arm to the front of the unit.
-
There are 5 clips pictured below. Check each one to ensure it is closed. The clip should lie flat, and you shouldn’t be able to flip it in any direction.
-
If any of the clips are open, ensure the cable is inserted straight into the clip and close the clip.
-
If any of the cables are misaligned in the clip, take a photo of the clip and cable and send it to me so I can take a look before you proceed. Do not try to adjust or reseat the cable.
-
Close the lid.
-
Turn your unit back on and wait for it to calibrate.
Let me know how it goes!